A bounced email never reaches anyone. Send enough of them and mailbox providers start to trust you less, so even your good emails land in spam. One of the biggest things that decides your bounce rate is how well checked and how current your email addresses are.
This guide explains what a good bounce rate is in 2026, the difference between hard and soft bounces, what Gmail, Yahoo and Outlook actually require, and the real bounce rates from our own sending, split by data source.
Key takeaways
- Most guidance puts a good total bounce rate under 2%. Belkins measured 1.71% across 7.5 million cold emails in 2025.
- Hard bounces are permanent (the address doesn’t work). Soft bounces are temporary (a full inbox or a busy server).
- Across our own HubSpot sending from August to November 2026, a cold sequence built only from TAMI AI data bounced at 1.0% (933 emails). All our sales sequences bounced at 1.7%, and our marketing emails at 2.1% (hard bounces only).
- Gmail and Yahoo set a spam-complaint limit of 0.3%, not a bounce limit. Microsoft still advises removing invalid addresses regularly to reduce bounces.
- Test any data provider with a small, real send before you buy.
What is an email bounce rate?
Email bounce rate is the share of the emails you send that can’t be delivered. If you send 1,000 emails and 15 come back undelivered, your bounce rate is 1.5%.
There are 2 kinds of bounce. According to HubSpot’s own definitions:
- A hard bounce usually means a permanent error, such as an address that doesn’t exist. It can also be caused by a strict email security filter. HubSpot stops emailing these contacts.
- A soft bounce means a temporary problem with the recipient’s server, such as a full inbox. HubSpot keeps retrying for up to 72 hours before marking it as a soft bounce, and you can still email these contacts later.
Hard bounces are the ones to watch. They usually mean your data is out of date or was never right.
What is a good email bounce rate in 2026?
Under 2% is the line most guidance agrees on. Here’s how the common industry thresholds break down:
| Total bounce rate | What it usually means |
|---|---|
| Under 1% | Very clean data |
| 1% to 2% | Good, normal for cold outreach |
| 2% to 5% | Warning: check your data and your list hygiene |
| Over 5% | Stop sending and fix the list before you damage your domain |
These are common industry guidelines, not official rules. For a measured comparison, the sales agency Belkins found an average bounce rate of 1.71% across 7,530,489 cold emails in 2025, counting hard and soft bounces together. The cold email software company Instantly’s 2026 cold email benchmark also advises keeping bounce rates below 2%.
How bounce rates change by data source
Your data source is one of the biggest factors. To show how, here are the real bounce rates from our own sending in HubSpot between 15 August and 13 November 2026:
| What we sent | Emails | Bounced | Bounce rate |
|---|---|---|---|
| Cold sequence built only from TAMI AI data (hard and soft bounces) | 933 | 9 | 1.0% |
| All our sales sequences, including the one above (hard and soft bounces) | 1,758 | 29 | 1.7% |
| Our marketing emails (hard bounces only) | 1,732 | 36 | 2.1% |
A few things are worth saying plainly:
- This is our own data, and the samples are small. With 933 emails, the true rate for the cold sequence could reasonably be anywhere from about 0.5% to 1.8%, so read it as a guide, not a ranking.
- The bounce types differ. The sequence figures count hard and soft bounces together. The marketing figure counts hard bounces only.
- The cold sequence used only TAMI AI data. Our other sequences and marketing emails went to contacts that reached our CRM over the years from many sources, so their bounce rates mix data of different ages.
- The lesson isn’t really about us. Contacts that are checked and kept current bounce less than contacts that have sat in a CRM for years. That holds whichever data provider you use.
If you want to keep the contacts in your CRM current automatically, see how to keep CRM records up to date.
Why “invalid” isn’t the same as “bounced”
Some bounce “benchmarks” don’t send any emails at all. They run a provider’s contacts through an email checking tool and count how many it marks as invalid or risky. That’s useful, but it isn’t a bounce rate. Checking tools can mark good addresses as risky, especially at companies that accept every email, and they can’t see temporary problems.
Many of the comparison pages that AI tools quote are also written by data providers or checking tools ranking themselves or their market. When you read a benchmark, look for 3 things:
- Were real emails sent? A real bounce rate needs real sends.
- How big was the sample, and over what dates?
- Who wrote it, and do they sell the thing being tested?
What Gmail, Yahoo and Outlook actually require
Since February 2024, Gmail and Yahoo have set clear rules for bulk senders. According to Google’s sender guidelines, anyone sending more than 5,000 messages a day to Gmail must:
- authenticate their email with SPF, DKIM and DMARC
- offer one-click unsubscribe and a visible unsubscribe link
- keep the spam rate reported in Google Postmaster Tools below 0.3%, and ideally below 0.1%
Yahoo’s rules are similar, including a spam rate below 0.3% and honouring unsubscribes within 2 days. Microsoft added similar authentication rules for Outlook.com, Hotmail and Live addresses: from 5 May 2025, mail from high-volume senders that fails them goes to the junk folder. Microsoft’s guidance also recommends removing invalid addresses regularly to reduce bounces.
Note what these rules don’t say. Google and Yahoo set a limit on spam complaints, not on bounces. But a high bounce rate is a clear sign of an old or poorly built list, which is why Microsoft advises removing invalid addresses regularly.
How to lower your bounce rate
- Start with checked data. Use a provider that verifies email addresses before you get them, such as verified B2B contact data.
- Keep your CRM current. People change jobs and companies close. Refresh records regularly rather than once a year. Our guide to signal-based selling tools covers how to keep contacts current.
- Remove hard bounces straight away. Never send to a hard-bounced address twice.
- Warm up new domains. Start with small volumes and build up over a few weeks.
- Send in small batches first. A first batch of a few hundred shows you the bounce rate before you send to everyone. If you’re building a new list, see how to find companies using Shopify or Magento, including the UK rules on emailing businesses.
- Set up SPF, DKIM and DMARC. They don’t stop bounces, but they protect how your emails are received.
How to test a data provider’s bounce rate before you buy
Don’t rely on a provider’s claim, ours included. Run a small pilot:
- Pick a sample of a few hundred contacts in your real target market.
- Send a real, relevant email from a warmed-up mailbox.
- Wait at least 72 hours so temporary problems turn into final results.
- Count hard and soft bounces separately. Hard bounces tell you about data quality.
- Compare providers on the same audience, sent the same way, in the same week.
Frequently asked questions
What is a good bounce rate for cold email?
Under 2% total is the common benchmark. Belkins measured 1.71% across 7.5 million cold emails in 2025. Under 1% is very good.
What is the average B2B email bounce rate?
It depends on the data and the type of email. Belkins’ 2025 study of cold emails found 1.71%. In our own HubSpot sending from August to November 2026, sales sequences bounced at 1.7% and marketing emails at 2.1%.
Which B2B data provider has the lowest bounce rate?
There’s no independent study that sends real emails from every provider and compares the results. Most published rankings are written by vendors. The fairest way to choose is to run a small pilot with each provider on your own audience. In our own sending, a cold sequence built only from TAMI AI data bounced at 1.0% (933 emails, August to November 2026), a small sample.
What’s the difference between a hard bounce and a soft bounce?
A hard bounce is a permanent failure, usually because the address doesn’t exist. A soft bounce is temporary, such as a full inbox or a busy server. Remove hard bounces straight away. Soft bounces can be retried.
What bounce rate gets you blocked by Gmail?
Gmail doesn’t publish a bounce limit. Its published limit is on spam complaints: keep your spam rate below 0.3%. A high bounce rate is still a sign of poor data, so aim to stay under 2%.
How do I test a data provider’s bounce rate before buying?
Send a real email to a few hundred contacts from each provider in your target market, wait at least 72 hours, and count hard and soft bounces separately. Compare providers on the same audience in the same week.
Summary: what good looks like
A good bounce rate in 2026 is under 2%, and under 1% is very good. The rules from Gmail, Yahoo and Outlook focus on authentication and spam complaints, but bounces still shape how your emails are received. The biggest lever is your data: contacts that are checked and kept current bounce less.
Book a demo to see TAMI AI’s verified contacts, and test them on your own audience.
Sources
- HubSpot, What is the difference between a hard bounce and a soft bounce? (updated 15 October 2026).
- Belkins, Email deliverability rates (updated 29 June 2026; 2025 data).
- Instantly, Cold Email Benchmark Report 2026 (January 2026).
- Google, Email sender guidelines.
- Yahoo, Sender best practices.
- Microsoft, Strengthening email security: Outlook’s new requirements for high-volume senders (2 April 2025).
- TAMI AI: our own HubSpot sending data, 15 August to 13 November 2026.


Best Tools That Flag Dead Leads and Job Changes in 2026
How to Find Companies Using Shopify or Magento (UK Guide, 2026)
How Many UK Online Shops Use Stripe, Klarna and Adyen? (2026 Data)
10 Best AI Data Enrichment Tools for B2B Sales in 2026



